产品详情
  • 产品名称:数显显微硬度计

  • 产品型号: MVD-1000A1/MVD-1000D1
  • 产品厂商:JMTT
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
数显显微硬度计采用计算机软件控制,高倍率光学测量系统,光电传感器等技术实现测量装置与压头自动切换,通过软件输入,光源的强弱自动调节,并选择维氏与努氏试验方法、保持时间、文件号与储存等,提供了各种硬度值的转换表以供参考,在LCD大屏幕显示屏上能显示试验方法、试验力、测量压痕长度、硬度值、试验力保持时间,测量次数并能键入年、月、日期,试验结果和数据处理等,通过打印机输出。
详情介绍:
数显显微硬度计
    MVD-1000A1/MVD-1000D1型数显显微硬度计是光机电一体化的高新技术产品,该仪器造型新颖、美观,而且它具有良好的可靠性,可操作性和直观性,是显微硬度计的升级换代产品。      
    数显显微硬度计采用计算机软件控制,高倍率光学测量系统,光电传感器等技术实现测量装置与压头自动切换,通过软件输入,光源的强弱自动调节,并选择维氏与努氏试验方法、保持时间、文件号与储存等,提供了各种硬度值的转换表以供参考,在LCD大屏幕显示屏上能显示试验方法、试验力、测量压痕长度、硬度值、试验力保持时间,测量次数并能键入年、月、日期,试验结果和数据处理等,通过打印机输出。      
    该机采用高倍率光学测量系统,目镜鼓轮一次读数。可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。   
    MVD-1000A1/MVD-1000D1 type the Digital Micro Hardness Tester Is light, mechanical, electrical integration of high-tech products, equipment Modeling novel, beautiful, and it has a good reliability, operability and intuitive, is micro-hardness  tester of the upgrading of products.
    The machine used computer software control, high-magnification optical measurement systems, photoelectric sensor technology such as measurement devices and automatic switching pressure head, through the software importation , the strength of light automatic adjustment, and select Vicker's and Knoop's test, and dwell time , And storage of documents, offers a variety of hardness value of the conversion table for reference, in the large-screen LCD screen can display test methods, testing, and measuring the length of indentation, hardness, the pilot of the hold time, measuring frequency And to type the year, month, date, test results and data processing, and so on, through the printer output.      
    That machine adopts the high magnification optics the diagraph the system,the eyes drum round is a to read the number.Can measurese the steel,have the color metals,the thin slice of IC,thin plastics,metals thin slice and draw the layer,surface layer,layer press the metals,heat handles   the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree. 
  
技术规格Main technical parameters
显微硬度标尺:Vickers scales:
HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5, HV1
显示:自动读数菜单显示5位数的硬度值,4位数的对角线长度(D1,D2),Display: Hardness value   5-digit
     试验力,保持时间,测试次数,平均值,标准偏差,返回         Diagonal length 4-digit(D1,D2) 
          Load duration    Dwell time(sec)
          Statistics       No.,average,Standard deviation
                           Return  
试验力(gf):10,25,50,100,200,300,500,1000Test force(gf):10,25,50,100,200,300,500,1000
加载控制:自动(加载/保持/卸载)Load control:automatic(loading/dwell/unload)
试验力保持时间(s):5~60Total test force dwell time(S):5~60
试验力选择:外置式选力旋钮Test force selection:External force election knob
  the test showed strength in LCD screen
物镜放大倍数:10×,40×Objective magnification:10×,40×
光通道:双光通道(目镜及CCD摄象通道)Optical path:2-way switchable(eyepiece and camera)
测量目镜:自动数字式编码器Measuring eyepiece:Automatic digital encoders
总放大倍数(μm):100×(观察), 400×(测量)Total magnification:100×(Observation), 400×(measurement)
测量范围(μm):200Measuring range(μm): 200
分辨率(μm):0.01Resolution:(μm):0.0625
测量范围:(5-3000)HV Measuring range:(5-3000)HV
XY试台     尺寸(mm):100×100XY stage   Dimensions(mm):100×100
         行程范围(mm):25×25           Travel range(mm):25×25
         蕞小读数(mm):0.01           Minimum reading: 0.01
试件蕞大高度(mm):85(2.55")Max height of speciments(mm):85(2.55")
试件蕞大宽度(mm):120(3.35")(从压头中心线至机壁距离)Distance from indeneter's center to outerwall(mm):120
输出:内置微型打印机,(RS232串行接口)Output:built-in printer(RS232 serial)
电源电压:AC220V/50HZPower supply:AC220V/50HZ
外形尺寸(mm):490×310×515Dimensions(mm):490×310×515
重量(kg):35Weight(kg):35
    数显显微硬度计
标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!